HOW TO ROOT XOLO Q1010i / Q1010 AFTER 4.4.2(KITKAT) UPDATE

Root Xolo Q1010i / Q1010 after 4.4.2 update

• Follow Carefully, 100% working
• Download Vroot

• Make sure you have installed the necessary device driver before moving on. You can download the drivers from HERE.

          DOWNLOAD DRIVERS

• Enable USB Debugging in your device settings. To enable go to Settings > Applications > Development

• Download the Vroot application and install on your PC by double tapping the file. Follow the onscreen instruction for successful installation of the application.

• Once done with installation, open the vroot on your PC.

• Connect the device to the PC with the help of USB cable.

• Before processing to next step, check whether your device is detected by the PC or not. If not then check the settings and try again.

• Now click the ROOT button (Green Button) in vroot application to start the rooting process.

• The rooting process goes on for few minutes. So don’t panic and be patient.

• After the rooting, the device will be automatically rebooted.

• Congratulations! You’ve just rooted you Xolo Q1010i